Inflatable Pool Dome Installation 5 steps for your backyard pool dome

Setting up an inflatable pool dome is quick and easy. It keeps your pool warm, stops leaves and dirt from getting in, and lets you swim comfortably even when it gets cold outside. Built to safety standards like the EN 13782:2015 Safety Specifications, these domes are strong, safe, and made to last. Follow these simple steps to install your custom inflatable pool dome structure step by step.

1

Site Preparation and Clearance

Clean the area around your pool carefully. Remove any rocks, twigs, or sharp objects from the ground so they do not puncture or damage the dome fabric when you lay it down.

Cleared patio prepared for inflatable pool dome setup

Pool area cleared and ready before laying out the dome.

2

Position and Unfold

Unfold the dome cover flat over your pool in the position you want it. Mark all the anchor spots around the edge, then fix the ground anchors in place last.

Inflatable dome unfolded flat over pool surface

Dome unfolded flat over the pool in its final position.

3

Punch Holes and Clip to Anchors

Punch small holes along the bottom edge of the dome. Use the provided clips to hook each hole directly to its ground anchor to keep the dome tightly attached.

Anchor head and clip connection mechanism

Anchor head and clip connection at the dome base.

4

Align Skirt and Weigh Down

Pull the bottom skirt inside the dome along the edge of the pool. Put heavy items on top of the skirt, such as water bags, sandbags, or bricks, to create a tight seal that stops air from leaking out.

Inflatable dome skirt tucked inside pool edge

Skirt tucked inside the dome along the pool edge.

Water bags and bricks weighing down dome skirt for seal

Bricks, sandbags, or water bags weighing down the skirt.

5

Turn On the Blower

Turn on your air blower to inflate the dome. Having small wrinkles when you first blow it up is totally normal. They will slowly disappear as the material warms up and stretches into place.

Freshly inflated pool dome showing initial minor creases

Freshly inflated – minor creases visible on day one.

Fully smoothed pool dome surface after 1 to 2 weeks

After 1-2 weeks of running – surface fully relaxed.

Tip: Creases on first install are normal. Keep the blower running continuously for 1 to 2 weeks and the surface will smooth out on its own. You do not need to pull it by hand.

Frequently Asked Questions

Q: How long does it take to fully setup an inflatable pool dome?

A: Typically, the basic setup takes about 1 to 2 hours with two people. Once the blower is connected, the dome will fully inflate in just a few minutes.

Q: Does the air blower need to run continuously?

A: Yes, for single-layer air domes, the blower must run continuously to maintain air pressure and structure stability. Modern blowers are energy-efficient and designed for long continuous operation.

Q: Can the pool dome withstand strong wind and rainy weather?

A: Yes, as long as all ground anchors are securely fixed and the interior skirt is properly weighted down with water bags or bricks, the dome remains highly stable in rain and typical windy conditions.

Need Help or Custom Sizing?

Have questions about dome sizes, blowers, or installation details? Contact our team anytime and we will be happy to assist you.

Contact Us

Send Us an Inquiry

Interested in our inflatable products? Fill out the form below and our experts will contact you shortly.

Please include: product name, quantity, customization (if any), delivery address, and required delivery time. You may also add any other relevant details to help us assist you better.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Scroll to Top